Apartment Building & Multifamily Repiping in Southern California
Repiping for Apartments, Condos & HOAs
Multifamily repiping is the planned replacement of a building’s aging water distribution system (risers, branch lines, and unit plumbing) with new copper or PEX piping. Unlike single-family repipes, multifamily projects have to account for shared risers, tenant access, phased scheduling, and building-code requirements across dozens of units. Repipe Once plans and executes the entire project: engineering the pipe routes, coordinating with tenants and property managers, and leaving every unit patched and paint-ready.
- Original piping
- Work underway
- New piping
Water is back on for affected units by the end of each workday.
An example, not a real building. Each building’s phases are planned around its own risers and occupancy.
How Does Repiping an Occupied Apartment Building Work?
We repipe an occupied building in phases, unit by unit, and water is back on for affected units by the end of each workday. Tenants stay in their homes throughout, and we supply tenant-notice templates so your property manager can communicate the schedule.
The plan comes first. We inspect the existing system, map the risers and branch lines, and plan the work in unit-by-unit phases. Crews then complete each unit’s piping in a controlled window. A typical unit takes one to two days of in-unit work, and phases run in parallel where the building allows.
Every phase is pressure-tested and inspected by the city before the walls close. We then patch and texture every opening, leaving the walls ready for paint, and walk the finished work with your manager. No two buildings run the same way, so the phases in the diagram are an example. Yours are planned around your building’s risers and occupancy.
Signs Your Building Needs Repiping
One leak is a maintenance ticket. These patterns mean the piping system itself is failing:
- Repeat Leaks Across Different Units – When pinhole leaks and slab leaks show up building-wide, spot repairs are treating symptoms.
- Tenant Complaints About Pressure or Rusty Water – Corroded galvanized pipe restricts flow and discolors water — and drives turnover.
- Original Galvanized or Polybutylene Piping – Buildings from the 1970s and earlier (galvanized) or 1978–1995 (polybutylene) are living on borrowed time.
- Climbing Maintenance & Insurance Costs – Repeated water-damage claims raise premiums; some carriers now require repipes on older buildings.
- Upcoming Renovation or Sale – A repipe protects the investment and removes a major inspection red flag.
If your building shows more than one of these signs, a building assessment will tell you exactly where the system stands.
Benefits of Repiping Your Building
A multifamily repipe is a capital project — and one that pays for itself in avoided emergencies and retained tenants:
- Stop the Leak Cycle – One planned project replaces years of emergency calls, water damage, and mold remediation.
- Happier, Longer-Staying Tenants – Consistent pressure and clean water end the complaint tickets.
- Lower Insurance Exposure – Documented new plumbing can reduce premiums and restore insurability on older buildings.
- Higher Property Value – A repiped building appraises better and clears buyer inspections.
- Predictable Budget – One upfront bid — not an open-ended series of emergency invoices.
Our Multifamily Repiping Process
Repiping an occupied building takes more than plumbing skill — it takes a plan. Ours:
- Building Assessment & Bid – We inspect the existing system, map risers and branch lines, run a video camera inspection of the drain and sewer lines where they are in scope, and deliver a clear, per-building bid with no hidden fees.
- Phased Schedule & Tenant Notices – We plan the work in unit-by-unit phases and provide notice templates so property managers can keep tenants informed.
- Repipe, Unit by Unit – Crews complete each unit’s piping in a controlled window — water is back on for affected units by the end of each workday.
- Pressure Testing & City Inspection – Every phase is pressure-tested and inspected to code before walls close.
- Patch, Texture & Walkthrough – We patch and texture every opening, leaving walls paint-ready, and walk the finished work with your manager.
Repiping for Condos and HOAs
A condo or HOA repipe runs the same way as an apartment repipe: in phases, unit by unit, with residents staying in their homes and water back on for affected units by the end of each workday. One question has to be settled first. The association’s governing documents (CC&Rs) decide which pipes the association is responsible for and which belong to the unit owner, so the board or manager should confirm that before the work is scoped.
We work with boards and management companies on common-line and in-unit scopes. Where a board has to sign off before work starts, we provide the scope and license documentation it asks for; Repipe Once is a licensed California contractor, CSLB #1004038. The bid is fixed and per building, with copper and PEX both priced where appropriate so the board can weigh cost against preference, and boards and management companies get the documentation they need for reserve studies.
Inside the units, the work is the same as in any occupied building. We provide notice templates so the manager can communicate the schedule, every phase is pressure-tested and inspected before the walls close, and every unit is left patched and paint-ready. We can pull the permits for you, or you can pull them yourself if you prefer.
Every Kind of Multifamily Property
No two buildings run the same way, so no two repipe plans should either.
- Apartment Buildings – From garden-style complexes to mid-rise buildings, scheduled around occupancy and turnover.
- Condos & HOAs – We work with boards and management companies on common-line and in-unit scopes, with documentation for reserve studies.
- Mixed-Use & Specialty Housing – Ground-floor retail with units above, student housing, and senior communities — phased to protect business hours and resident care schedules.
Whatever the property type, the promise is the same: one project, decades of service.
Testimonials
Why Choose Repipe Once for Your Building?
A building repipe is a major capital decision, and the contractor matters as much as the material.
- Multifamily Experience – Crews sized and scheduled for buildings, not just houses.
- Licensed, Insured & Permitted – Full permits, pressure tests, and city inspections on every phase.
- Minimal Tenant Disruption – Water restored daily; occupied units stay occupied.
- Copper or PEX – We bid both where appropriate so owners can weigh cost against material preference.
- Done Once, Done Right – One project, decades of service. Workmanship is warranted for 15 years as standard, and a lifetime warranty is available on qualifying work.
Frequently Asked Questions
How much does it cost to repipe an apartment building?
Pricing is per project, driven by unit count, stories, pipe material (copper vs PEX), and how much of the system is shared risers versus in-unit branch lines. Repipe Once provides a free building assessment and a fixed, per-building bid — the number we quote is the number you pay. Financing is available through our Hearth partner program.
Do tenants have to move out during a repipe?
No. We repipe in phases, unit by unit, and restore water to affected units by the end of each workday. Tenants stay in their homes; we provide notice templates so your property manager can communicate the schedule.
How long is each unit without water during the repipe?
Only during the working day. Water is back on for affected units by the end of each workday, and we schedule each shutoff to be as short as possible. A typical unit takes one to two days of in-unit work.
How long does it take to repipe a multifamily building?
A typical unit takes one to two days of in-unit work, and phases run in parallel where the building allows. A small complex often finishes in a couple of weeks; larger buildings are scheduled phase by phase around your occupancy.
How is the work phased in an occupied building?
Unit by unit. After the building assessment we map the risers and branch lines and plan the work in phases, then complete each unit’s piping in a controlled window. Phases run in parallel where the building allows, and every phase is pressure-tested and inspected before the walls close. Larger buildings are scheduled phase by phase around your occupancy.
Who patches the walls in each unit after the repipe?
We do. Patching is part of the job, not an extra. We patch and texture every opening we make and leave the walls ready for paint. We don’t paint, so the final coat is yours or your painter’s.
Should we repipe with copper or PEX?
Both work well in multifamily buildings. Copper is time-tested and extremely durable; PEX costs less, needs fewer wall openings, and tolerates seismic movement well. We bid both where appropriate so the board or owner can weigh cost against preference.
Who handles permits, inspections, and tenant coordination?
Repipe Once can pull the permits for you, or you can pull them yourself if you prefer. When we pull them, we also schedule the city inspections. Either way, we pressure-test every phase and supply the tenant notices, so your manager stays informed without running the project.
Do you work with HOA boards and property management companies?
Yes. We work with boards and management companies on common-line and in-unit scopes, and we provide the scope and license documentation boards ask for, along with documentation for reserve studies. The association’s governing documents (CC&Rs) decide which pipes the association is responsible for and which belong to the unit owner, so the board or manager should confirm that before the work is scoped.
Request a Building Assessment
Stop budgeting for the next leak. Repipe Once provides free repiping assessments and per-building bids for apartments, condos, and HOAs across Los Angeles, the San Gabriel Valley, the Inland Empire, and Orange County.
One project, decades of reliable plumbing — done once, done right.